One Component CFC Polyurethane Spray Gap Filling Foam
Descriptions :
1.One component polyurethane foam is the product of atomization technology and polyurethane technology;
2.One component polyurethane foam is a special polyurethane product which is made from prepolymer,foaming agent and catalyst ;
3.The polyurethane foam from the tin will be expanded and foamed once it contact air ;
4.The foam after curing has the function of filling gap, gluing, sealing, insulation,reducing noisy etc;
5.The one component polyurethane foam is a enviromental and easy use construction material which is suitable for filling gap,fixing crack,gluing, heat insulation ,cold insulation and reducing noisy, it is specially suitable for gap filling and waterproofing between the steel window or aluminum window and wall .
Charactristics :
1.Easy use :no need special trained worker , it is DIY product ;
2.Automatically spray:no need casting equipment, the polyurethane foam will spray to the gap where needed by the pressure from the tin ;
3.Self expanded :the polyurethane foam will be expanded after application
4.Moisture curing :the polyurethane is cured by the moisture in the air ;
5.Self sealing :no special treatment to the substrate suraface, it has good sealing to the surface which is wet;
6.Widly uses : thousands of uses in construction and industrial area
Methods of applications :
1.Before application ,clean the substrate surface dust, oil etc and spray some water ;
2.Shake the tin at least 60second to ensure uniform inside the tin ;
3.Screw foam dispenser on tightly and turn can upside down;
4.Half filling to the gap , from bottom to top for the vertical gap ,some support is necessary to fill the gap on ceiling because the uncured foam will drop;
5.The touch time of foam is about 10minutes, and the cutting time is 60minutes after application ;
6.Cut the unwanted foam, and apply some cement ,paint or silicone on the surface of the foam to make long life.
Typical applications :
1.Door or windows installation:the gap between door or window and wall, fixing and sealing ;
2.Advertising models:models and sand table making, panel repair ;
3.Sound insulation :gaping filling in sound lab and studio when in decoration ;
4.Waterproof and antileakage :repair and antileakage to the gap from water supply pipeline and gutter ;
5.Package and transport :packing valuables ,saving time and fast transport.
Attentions :
1.The application degree is bwteeen 5c to 40c, the best application degree is between 18c to 25c. In cold weather, keep goods in the degree between 25c to 30c to make sure best performance. The curing foam heat resistance is between -35c to 80c;
2.The higher humidity, the faster curing .Use the cleaner to the uncured foam, while the mechinery method cutting for curing foam;
3.The direct sunshine will make the foam yellow, apply come cement, paint or silicone on the surface of the foam. Use the appointed cleaner to clean the pu foam gun;
4.Shake new tin at least 20times before changing the old tin, and fix the new tin fastly to prevent the foam to be cured inside the gun ;
5.The gun valve and tigger can control the foam spray speed, use it according to your demand .
Capability :
Packaging:
Straw type and gun type
300ml/500ml/750ml per tin
Shipping:
20'container:1296cartons 750ml
40'container:5400cartons 300ml
20-25days for one 20'container
Our services:
1.fast and smile online response;
2.sample checking before order;
3.ontime production feedback;
4.best after-sales services;
Questions :
1.Can you send us sample ?
Yes, sample is free
2.Can you give us private design ?
Yes, the moq with private design is 500cartons; for factory design, the moq is 200cartons
3.What's the payment item?
By T/T, 30% as deposit, the rest to be paid after seeing the BL copy
4.Where is your port?
tianjin/qingdao
5.What's your guarantee?
We guarantee goods quality is same as sample's and what we descrip.
6.Can you provide us your client information ?
Yes, for checking our company reputation and sample collection.
7.How many days you want to produce one 20'container?
Maxinum 15days
8.Can we visit factory?
Yes any time.
9.Documents ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.
Welcome your enquiry by email or by call !
Descriptions :
1.One component polyurethane foam is the product of atomization technology and polyurethane technology;
2.One component polyurethane foam is a special polyurethane product which is made from prepolymer,foaming agent and catalyst ;
3.The polyurethane foam from the tin will be expanded and foamed once it contact air ;
4.The foam after curing has the function of filling gap, gluing, sealing, insulation,reducing noisy etc;
5.The one component polyurethane foam is a enviromental and easy use construction material which is suitable for filling gap,fixing crack,gluing, heat insulation ,cold insulation and reducing noisy, it is specially suitable for gap filling and waterproofing between the steel window or aluminum window and wall .
Charactristics :
1.Easy use :no need special trained worker , it is DIY product ;
2.Automatically spray:no need casting equipment, the polyurethane foam will spray to the gap where needed by the pressure from the tin ;
3.Self expanded :the polyurethane foam will be expanded after application
4.Moisture curing :the polyurethane is cured by the moisture in the air ;
5.Self sealing :no special treatment to the substrate suraface, it has good sealing to the surface which is wet;
6.Widly uses : thousands of uses in construction and industrial area
Methods of applications :
1.Before application ,clean the substrate surface dust, oil etc and spray some water ;
2.Shake the tin at least 60second to ensure uniform inside the tin ;
3.Screw foam dispenser on tightly and turn can upside down;
4.Half filling to the gap , from bottom to top for the vertical gap ,some support is necessary to fill the gap on ceiling because the uncured foam will drop;
5.The touch time of foam is about 10minutes, and the cutting time is 60minutes after application ;
6.Cut the unwanted foam, and apply some cement ,paint or silicone on the surface of the foam to make long life.
Typical applications :
1.Door or windows installation:the gap between door or window and wall, fixing and sealing ;
2.Advertising models:models and sand table making, panel repair ;
3.Sound insulation :gaping filling in sound lab and studio when in decoration ;
4.Waterproof and antileakage :repair and antileakage to the gap from water supply pipeline and gutter ;
5.Package and transport :packing valuables ,saving time and fast transport.
Attentions :
1.The application degree is bwteeen 5c to 40c, the best application degree is between 18c to 25c. In cold weather, keep goods in the degree between 25c to 30c to make sure best performance. The curing foam heat resistance is between -35c to 80c;
2.The higher humidity, the faster curing .Use the cleaner to the uncured foam, while the mechinery method cutting for curing foam;
3.The direct sunshine will make the foam yellow, apply come cement, paint or silicone on the surface of the foam. Use the appointed cleaner to clean the pu foam gun;
4.Shake new tin at least 20times before changing the old tin, and fix the new tin fastly to prevent the foam to be cured inside the gun ;
5.The gun valve and tigger can control the foam spray speed, use it according to your demand .
Capability :
Density (15-30 KG/M3) | 15-30 |
Adhesive strength(PVC to PVC ) | above 100kPa |
Adhesive strength(aluminum to aluminum ) | above 80kPa |
Elogation at break | 8-20% |
Shear Strength | 22-50kPa |
Thermal conductivity | below 0.035W/MK |
Tack-free time | 7-13min |
Cutting time | 60min |
close cell rate | 60-70% |
Shelf life | 9Months |
Packaging:
Straw type and gun type
300ml/500ml/750ml per tin
Shipping:
20'container:1296cartons 750ml
40'container:5400cartons 300ml
20-25days for one 20'container
Our services:
1.fast and smile online response;
2.sample checking before order;
3.ontime production feedback;
4.best after-sales services;
Questions :
1.Can you send us sample ?
Yes, sample is free
2.Can you give us private design ?
Yes, the moq with private design is 500cartons; for factory design, the moq is 200cartons
3.What's the payment item?
By T/T, 30% as deposit, the rest to be paid after seeing the BL copy
4.Where is your port?
tianjin/qingdao
5.What's your guarantee?
We guarantee goods quality is same as sample's and what we descrip.
6.Can you provide us your client information ?
Yes, for checking our company reputation and sample collection.
7.How many days you want to produce one 20'container?
Maxinum 15days
8.Can we visit factory?
Yes any time.
9.Documents ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.
Welcome your enquiry by email or by call !